Soundlight Loudspeaker installations don't come more discreet than the Ci50 Soundlight System. A full bandwidth sound system consisting of four satellite speakers and a twin-ported subwoofer, the only visible components are designed to be virtually indistinguishable from a standard 50mm low voltage light fitting once installed.
Specifications
| Model |
Ci50R Soundlight System |
| Nominal Impedance |
4Ω |
| Sensitivity (2.83V @ 1m) |
88dB |
| Frequency Response +/-6dB 2pi/open-backed |
62 - 20kHz |
| Frequency Response +/-6dB With back can/rear enclosure |
62 - 20kHz |
| Crossover Frequency |
220Hz |
| Drive Units (LF / MF / HF) |
100mm / 4 x 50mm / - |
| Recommended Amplifier Power |
10-100W |
| Features |
Subwoofer packaged with 4 x Ci50R in the Soundlight System |
| Product External Dimensions (Diameter / Width / Depth) |
Subwoofer unit: 350mm / Subwoofer unit: 180mm / Subwoofer unit: 104mm |
| Cut-out Dimension (Diameter) |
Soundlight: 65mm / Subwoofer: None |
| Mounting Depth from Surface (Product only / With back can) |
Please see the product manual / - |
|
Ci50R Imagine a speaker that's no more obtrusive than a standard 50mm (2in.) low voltage downlighter, yet powerful enough to flood a sizeable space with high definition sound and designed to smoothly integrate and architecturally match with existing downlighting. Impressively vocal and superbly balanced, the Ci50R is a masterpiece of intelligent miniaturisation — and thanks to the design and specification of the drive unit, a deceptively accomplished performer in real rooms.
Specifications
| Model |
Ci50R |
| Nominal Impedance |
6Ω |
| Sensitivity (2.83V @ 1m) |
82dB |
| Frequency Response +/-6dB 2pi/open-backed |
125 - 20kHz |
| Frequency Response +/-6dB With back can/rear enclosure |
170 - 20KHz |
| Crossover Frequency |
- |
| Drive Units (LF / MF / HF) |
- / 50mm / - |
| Recommended Amplifier Power |
10-30W |
| Features |
White, Brass, Stainless Steel or Chrome Trim / Optional Metal Back Can |
| Product External Dimensions (Diameter / Width / Depth) |
80mm (3.15in.) / - / 55mm (2.17in.) / 90mm (3.54in.) with back can |
| Cut-out Dimension (Diameter) |
65mm (2.56in.) / 70mm (2.76in.) with back can |
| Mounting Depth from Surface (Product only / With back can) |
50mm (1.97in.) / 90mm (3.54in.) |
|
Ci80QR The quality of a speaker is no less important just because it's out of sight — in fact, with ceiling-mounted units, it can be more so. Designed to smoothly integrate and architecturally match with existing downlighting sharing the same size bezel, KEF's trademark Uni-Q technology has a decisive performance advantage in these applications, because each point source driver array evenly disperses the sound, ensuring a smooth frequency response over a large area to create a spacious three-dimensional soundscape with genuine texture and depth.
Specifications
| Model |
Ci80QR |
| Nominal Impedance |
4Ω |
| Sensitivity (2.83V @ 1m) |
85dB |
| Frequency Response +/-6dB 2pi/open-backed |
100 - 27kHz |
| Frequency Response +/-6dB With back can/rear enclosure |
130 - 27kHz |
| Crossover Frequency |
3kHz |
| Drive Units (LF / MF / HF) |
80mm / - / 15mm |
| Recommended Amplifier Power |
10-50W |
| Features |
Uni-Q Array, Removeable Plastic Back Can |
| Product External Dimensions (Diameter / Width / Depth) |
103mm (4.06in.) / - / 140mm (5.51in.) |
| Cut-out Dimension (Diameter) |
97mm (3.82in.) |
| Mounting Depth from Surface (Product only / With back can) |
80mm (3.15in.) / 139mm (5.47in.) |
|
Ci100QR The quality of a speaker is no less important just because it's out of sight — in fact, with ceiling-mounted units, it can be more so. Designed to smoothly integrate and architecturally match with existing downlighting sharing the same size bezel, KEF's trademark Uni-Q technology has a decisive performance advantage in these applications, because each point source driver array evenly disperses the sound, ensuring a smooth frequency response over a large area to create a spacious three-dimensional soundscape with genuine texture and depth. With a two-way Uni-Q driver of 100mm (4in.), the Ci100QR is as satisfyingly musical to hear as it is neat in appearance.
Specifications
| Model |
Ci100QR |
| Amplifier Requirements |
10 - 50W |
| Nominal Impedance |
4Ω |
| Sensitivity (2.83V @ 1m) |
88dB |
| Frequency Response +/-6dB 2pi/open-backed |
80 - 27kHz |
| Frequency Response +/-6dB With back can/rear enclosure |
110 - 27kHz |
| Crossover Frequency |
3kHz |
| Drive Units (LF / MF / HF) |
100mm / - / 19mm |
| Recommended Amplifier Power |
10-50W |
| Features |
Uni-Q Array, Removeable Plastic Back Can |
| Product External Dimensions (Diameter / Width / Depth) |
127mm (5in.) / - / 148mm (5.83in.) |
| Cut-out Dimension (Diameter) |
118mm (4.65in.) |
| Mounting Depth from Surface (Product only / With back can) |
100mm (3.94in.) / 145mm (5.71in.) |
|
Ci130.2FR KEF's full range Ci130.2FS and Ci130.2FR are serious speakers at an affordable price. The Ci130.2 is well suited for the high quality music and speech reinforcement applications where good hi-fi performance is required. Sharing KEF's versatility of flush mounting square speakers in walls or round speakers in ceiling with ease of installation, the speaker is at home either installed indoors, even in bathrooms, or outside (under eaves).
Specifications
| Model |
Ci130.2FR |
| Nominal Impedance |
8Ω |
| Sensitivity (2.83V @ 1m) |
87dB |
| Frequency Response +/-6dB 2pi/open-backed |
50 - 20kHz |
| Frequency Response +/-6dB With back can/rear enclosure |
100 - 20kHz |
| Crossover Frequency |
- |
| Drive Units (LF / HF) |
130mm / - |
| Recommended Amplifier Power |
10-50W |
| Features |
UL2043 & UL1480-5 approved / Metal Back Can |
| Product External Dimensions (Diameter / Depth) |
180mm (7.09in.) / 157mm (6.18in.) |
| Cut-out Dimension (Diameter) |
158mm (6.22in.) |
| Mounting Depth from Surface (Product only / With back can) |
77mm (3.03in.) / 154mm (6.06in.) |
|
Ci130.2QR Intended to be as unobtrusive as possible, the Ci Series Ci130.2QS and Ci130.2QR are high-fidelity flush-mount loudspeakers utilising KEF's Uni-Q driver array technology. This gives the round and square bezel speakers the inherent smooth dispersion characteristics to fill any normal room with an expansive, generous and rich sound stage.
Specifications
| Model |
Ci130.2QR |
| Nominal Impedance |
8Ω |
| Sensitivity (2.83V @ 1m) |
86dB |
| Frequency Response +/-6dB 2pi/open-backed |
50 - 40kHz |
| Frequency Response +/-6dB With back can/rear enclosure |
100 - 40kHz |
| Crossover Frequency |
2.8kHz |
| Drive Units (LF / HF) |
130mm / 19mm |
| Recommended Amplifier Power |
10-50W |
| Features |
Uni-Q Array / UL2043 & UL1480-5 approved / Metal Back Can |
| Product External Dimensions (Diameter / Depth) |
180mm (7.09in.) / 157mm (6.18in.) |
| Cut-out Dimension (Diameter) |
158mm (6.22in.) |
| Mounting Depth from Surface (Product only / With back can) |
90mm (3.54in.) / 154mm (6.06in.) |
|
Ci160.2FS The full range Ci160.2FS and Ci160.2FR share with the smaller Ci130FS/FR, KEF's ideal to produce serious custom installation speakers at an affordable yet competitive price.
Specifications
| Model |
Ci160.2FR |
| Nominal Impedance |
4Ω |
| Sensitivity (2.83V @ 1m) |
89dB |
| Frequency Response +/-6dB 2pi/open-backed |
60 - 20kHz |
| Frequency Response +/-6dB With back can/rear enclosure |
- |
| Crossover Frequency |
- |
| Drive Units (LF / HF) |
160mm |
| Recommended Amplifier Power |
10-100W |
| Features |
- |
| Product External Dimensions (Diameter / Depth) |
220mm (8.66in.) / 87mm (3.43in.) |
| Cut-out Dimension (Diameter) |
196mm (7.72in.) |
| Mounting Depth from Surface (Product only / With back can) |
82mm (3.23in.) / - |
|
Ci160.2QR The Ci Series Ci 160.2QR is high-fidelity flush-mount loudspeaker utilising a fourth generation Uni-Q® driver array.
Specifications
| Model |
Ci160.2QR |
| Nominal Impedance |
8Ω |
| Sensitivity (2.83V @ 1m) |
89dB |
| Frequency Response +/-6dB 2pi/open-backed |
60 - 24kHz |
| Frequency Response +/-6dB With back can/rear enclosure |
- |
| Crossover Frequency |
2.8kHz |
| Drive Units (LF / HF) |
160mm / 19mm |
| Recommended Amplifier Power |
10-100W |
| Features |
Uni-Q Array |
| Product External Dimensions (Diameter / Depth) |
220mm (8.66in.) / 93mm (3.66in.) |
| Cut-out Dimension (Diameter) |
196mm (7.72in.) |
| Mounting Depth from Surface (Product only / With back can) |
89mm (3.5in.) / - |
|
Ci200.3QT Sometimes custom installation needs something extra special and KEF's Ci200.3QT is just that. Easily configured for infrared remote control an integral DC motor allows you to position the speaker at the optimum angle with the press of a button. When fully retracted it can be operated as a conventional ceiling flush mounted speaker.
Specifications
| Model |
Ci200.3QT |
| Nominal Impedance |
8Ω |
| Sensitivity (2.83V @ 1m) |
89dB |
| Frequency Response +/-6dB With back can/rear enclosure |
50 - 30k |
| Crossover Frequency |
1.8kHz |
| Drive Units (LF / MF / HF) |
200mm / - / 25mm |
| Recommended Amplifier Power |
10-100W |
| Features |
Quiet Motorised, In-Ceiling Uni-Q Array |
| Product External Dimensions (Height / Width / Depth) |
381mm (15.0in.) / 279mm (10.98in.) / 210mm (8.27in.) |
| Cut-out Dimension (Height / Width) |
363mm (14.29in.) / 260mm (10.24in.) |
| Mounting Depth from Surface (Product only / With back can) |
210mm (8.27in.) / - |
|
Ci200.3QR This is the Ci200.3QR flagship ceiling speaker offering outstanding performance. Audiophile quality sound is derived from KEF's Uni-Q driver array technology, providing your room with an expansive soundscape, excellent bass extension and so creating the perfect sound stage. Thanks to KEF's simple and ingenious screw down clamping system you'll find them easy and quick to install. Designed with moisture- resistant fixings allowing placement in the harshest environments such as bathrooms or kitchens, the Ci200.3QR offers excellent quality with no sacrifice.
Specifications
| Model |
Ci200.3QR |
| Nominal Impedance |
6Ω |
| Sensitivity (2.83V @ 1m) |
89dB |
| Frequency Response +/-6dB 2pi/open-backed |
43 - 24kHz |
| Frequency Response +/-6dB With back can/rear enclosure |
- |
| Crossover Frequency |
1.8kHz |
| Drive Units (LF / HF) |
200mm / 25mm |
| Recommended Amplifier Power |
10-100W |
| Features |
Uni-Q Array |
| Product External Dimensions (Diameter / Depth) |
275mm (10.83in.) / 108mm (4.25in.) |
| Cut-out Dimension (Diameter) |
240mm (9.45in.) |
| Mounting Depth from Surface (Product only / With back can) |
102mm (4.02in.) / - |
|
Ci3-80QT The most elegant design solution to the perennial problem of where to place the all-important front speakers in a high-end home theatre installation, the motorised Ci3-80QT purrs down into position from the ceiling. With a 75mm (3in.) Uni-Q array flanked by a pair of long-throw bass drivers of the same size, it combines Uni-Q's exceptionally wide dispersion characteristics with fluent and accurate response right across the frequency range.
Specifications
| Model |
Ci3-80QT |
| Nominal Impedance |
8Ω |
| Sensitivity (2.83V @ 1m) |
87dB |
| Frequency Response +/-6dB With back can/rear enclosure |
87 - 27k |
| Crossover Frequency |
300Hz, 3kHz |
| Drive Units (LF / MF / HF) |
2 x 75mm / 75mm / 15mm |
| Recommended Amplifier Power |
10-100W |
| Features |
Quiet Motorised, Three-way In-Ceiling Uni-Q Array |
| Product External Dimensions (Height / Width / Depth) |
128mm (5.04in.) / 377mm (14.84in.) / 125mm (4.92in.) |
| Cut-out Dimension (Height / Width) |
112mm (4.41in.) / 354mm (13.94in.) |
| Mounting Depth from Surface (Product only / With back can) |
120mm (4.72in.) / - |
|