CWM 8.3

CWM 8.3 is a three-way, in-wall loudspeaker, conceived to offer the very best performance for a customer requiring great sound, without seeing the source. It features a Carbon Braced Tweeter, a 5in Kevlar FST drive unit and two 7in carbon fibre reinforced Rohacell low frequency drivers. The central baffle is rotatable, so CWM 8.3 can be used in either vertical or horizontal alignment.

Specifications

CWM 8.5

CWM 8.5 is a two-way, in-wall loudspeaker. It offers high-performance acoustics, from a relatively compact loudspeaker. It features a Carbon Braced Tweeter and a single 7inch bass/mid Kevlar driver, with anti-resonance plug. It also features a single Flowport for smooth bass performance.

Specifications

CCM 8.5

CCM 8.5 is a two-way in-ceiling loudspeaker, which offers high-quality acoustics in an incredibly discreet package. It features a Carbon Braced Tweeter and a single 7inch bass/mid Kevlar driver, with anti-resonance plug. All the drive units are located in a continuously rotatable mini baffle, which allows for the custom installation version of ‘toeing in’ the loudspeaker.

Specifications

CCM7.3

Setting a whole new standard for in-ceiling sound quality, the top-range CCM7.3 is a three-way speaker featuring true audiophile technologies such as a Nautilus tube-loaded 25mm(1in) soft dome tweeter, a 100mm (4in) FST™ Kevlar® mid-range and two 130mm (5in) paper/Kevlar bass drivers. Other high-performance features include a reinforced ABS baffle, and a scallop under the tweeter for better roll-off at high frequencies, resulting in more accurate sound reproduction.

Specifications

CCM7.4

The mid-point for in-ceiling speakers in the CI 700 range, the CCM7.4 features a wealth of high performance technologies, including two 130mm (5in) bass/midrange Kevlar® drivers set in a rigid die-cast chassis and a Nautilus™ tube-loaded 25mm (1in) soft dome tweeter. Other high-performance features include a glass-reinforced ABS baffle, and a scallop under the tweeter for better roll-off at high frequencies, resulting in more accurate sound reproduction.

Specifications

CCM7.5

While it might be the entry level speaker in the CI700 in-ceiling range, the CCM7.5 certainly doesn't skimp on high-spec features. For starters, the speaker pairs up a mighty 150mm (6in) Kevlar bass/midrange driver in a rigid die-cast chassis with a Nautilus™ tubeloaded 25mm (1in) soft dome tweeter. Like other in-ceiling speakers in the range, it also has a glass-reinforced ABS baffle, and a scallop under the tweeter for better roll-off at high frequencies, resulting in more accurate sound reproduction.

Specifications

CWM7.3

Our top range in-wall speaker, the CWM7.3 is a mighty three-way unit bringing together tried and tested audiophile technologies with new innovations specially developed for custom installation. The speaker features twin 150mm (6in) bass drivers, a 100mm (4in) FST™ mid-range driver and a Nautilus™ tube loaded 25mm (1in) soft dome tweeter. New features include rigid die-cast chassis for the drivers, high-quality Mundorf crossover components and a rock-solid baffle constructed from glass-reinforced ABS. A truly exceptional in-wall speaker

Specifications

CWM7.4

The mid-point in the CI700 range of in-wall speakers, the CWM7.4 has a more manageable size than the CWM7.3, but comes with a similarly impressive set of features, such as a 150mm (6in) bass/midrange driver set in a rigid die-cast chassis, a Nautilus™ tube-loaded 25mm (1in) soft dome tweeter and reinforced ABS baffle. The speaker uses a scallop under the tweeter to create a better roll-off at high frequencies, resulting in more accurate sound reproduction. Other high quality features include Mundorf crossover components and our Flowport™ venting system for a cleaner, more responsive bass.

Specifications

CWM7.5

The entry-point in our CI700 in-wall speaker range, the CWM7.5 is the smallest of the three speakers but comes packed with superb, reference-quality features such as a 130mm (5in) bass/midrange driver set in a rigid die-cast chassis, a Nautilus™ tube-loaded 25mm (1in) soft dome tweeter and reinforced ABS baffle. Other high quality features include Mundorf crossover components and our Flowport™ venting system for a cleaner, more responsive bass.

Specifications

CCM 682

A high performance ceiling-mount speaker featuring a 200mm (8in) Kevlar cone bass/midrange driver with a rigid die-cast chassis, and a Nautilus swirl-loaded aluminium dome tweeter that pivots for adjustable off-axis treble response. A 30mm coil and 100mm magnet make this an incredibly efficient and reliable speaker, with outstanding sound quality and a maximum amp power of 150W. Other features include superior crossovers components, gold plated terminals and a three-position EQ switch.

Specifications

CCM 683

The CCM683 shares most of the high-performance features of the CCM 682, but has a slightly lower maximum amp power of 130W. Like the CCM682, this speaker comes with a 200mm (8in) Kevlar® cone bass/midrange driver with a rigid die-cast chassis, a Nautilus swirl-loaded aluminium dome tweeter that pivots for adjustable off-axis treble response, and a three-position EQ switch.

Specifications

CCM 684

The entry point among the CI 600 range of 8in in-ceiling speakers, the two-way CCM684 features a 200mm (8in) woven glass fibre cone bass/midrange driver and a soft dome tweeter in a neat circular ceiling mount chassis. As with the other 8in speakers in the range, the tweeter housing pivots for adjustable off-axis treble response. It also comes with an EQ switch, as well as QuickDogs™ and a plug-and-play functionality for easy installation.

Specifications

CCM 662

The top 6in in-ceiling speaker in the CI 600 series. This high-performance speaker features a Nautilus swirl-loaded 25mm (1in) aluminium dome tweeter that pivots for adjustable off-axis treble response. Other highlights include a bass/midrange driver with a rigid die-cast chassis, a three-position EQ switch, superior crossover components, gold plated terminals and an impressive maximum amp power of 150W. Installation couldn't be easier, thanks to our QuickDogs™ fixing system and plug-and-play connection.

Specifications

CCM 663

This high-performance 6in in-ceiling speaker features a Nautilus swirl-loaded 25mm (1in) aluminium dome tweeter that pivots for adjustable off-axis treble response. Other highlights include a bass/midrange driver with a rigid die-cast chassis and a three-position EQ switch. The maximum amp power is 130W. Installation couldn't be easier, thanks to our QuickDogs™ fixing system and plug-and-play connection.

Specifications

CCM 664

The CCM664 features an adjustable, tilt-offset 25mm (1in) soft dome tweeter, and a 150mm (6in) woven glassfibre bass/midrange driver. Quick and easy to install, the speaker also incorporates a three-position EQ switch for a better off-axis response. A cost-effective route to high quality ceiling mount sound.

Specifications

CCM 665

The entry-point in the CI600 in-ceiling range, the CCM665 is perfect for smaller listening areas like bathrooms or kitchens. The speaker features a 150mm (6in) woven glassfibre bass/midrange driver and a soft dome tweeter. QuickDogs™ and plug-and-play functionality make installation a breeze.

Specifications

CCM663SR

A high-performance, in-ceiling surround speaker that's ideal for the surround sound channel in a home theatre set-up, or for bringing stereo sound to rooms where space is limited. The speaker brings together a twin voice-coil 150mm (6in) Kevlar bass/midrange driver with two 25mm (1in) soft dome tweeters. This combines the stereo signal, allowing the use of just one ceiling speaker without the loss of one audio channel. The speaker can be changed from stereo to surround sound mode at the flick of a switch.

Specifications

CCM664SR

Like the CCM663SR, this is a dual, two-way ceiling speaker combining two offset tweeters and a twin voice coil bass/midrange driver to allow either for a combined stereo signal from one speaker, or for rear-channel surround sound. This speaker features a 150mm (6in) woven glass fibre cone bass/midrange driver and soft dome tweeters, as well as a two-position stereo/surround switch to instantly change between modes.

Specifications

CWM663

The CWM663 features a 150mm (6in) blue Kevlar® bass/midrange driver housed in a die-cast chassis, providing extra rigidity for cleaner, faster bass. The speaker also incorporates a 25mm (1in) Nautilus tube-loaded aluminium dome tweeter, and a three-position high frequency switch for acoustic fine-tuning. Installation is almost effortless, thanks to our new QuickDogs™ fixing system and plug-and-play connection.

Specifications

CWM664

The CWM664 has the same basic features and dimensions as the CWM663, but uses a soft dome Nautilus tube-loaded tweeter instead of an aluminium dome, and a black glass fibre bass/midrange cone instead of blue Kevlar®. Installation is just as easy, thanks to our new QuickDogs™ fixing system and plug-and-play connection.

Specifications

CWM652

Slightly smaller than its two bigger cousins, the CWM652 still packs a very powerful punch thanks to top-range technologies. Its 130mm (5in) blue Kevlar® bass/midrange driver is housed in a die-cast chassis, providing extra rigidity for cleaner, faster bass. The speaker also incorporates a 25mm (1in) Nautilus™ tube-loaded aluminium dome tweeter, and a three-position high frequency switch for acoustic fine-tuning. Installation is almost effortless, thanks to our new QuickDogs™ fixing system and plug-and-play connection.

Specifications

CCM382

The CCM382 is a two-way in-ceiling loudspeaker, balanced for wide-angle listening. It comes with a choice of round or square baffles, and like all the models in the CI 300 Series it features an elegant minimal-width border design.

Specifications

CCM362

The CCM362 is a two-way in-ceiling loudspeaker, balanced for wide-angle listening. It comes with a choice of round or square baffles, and like all the models in the CI 300 Series it features an elegant minimal-width border design.

Specifications

CWM362

The CWM362 is a two-way in-wall loudspeaker. Like the in-ceiling models in the series, it features an elegant minimal-width border design.

Specifications

ISW-3

The ISW-3 is an incredibly versatile and compact in-wall and in-ceiling subwoofer, capable of providing high-quality bass output in spaces that may have previously missed out on this vital element, including kitchen cabinets! Its balanced design, featuring 2 x 6in drivers, means that it can be placed in a variety of locations without causing vibrations.

Specifications

ISW-4

Need big sound, slamming bass and audiophile extension, but don’t want to see where it comes from? The ISW-4 in-wall subwoofer is for you. Two long-throw 200mm (8in) drivers allow it to move the large volumes of air needed for high-quality low-frequency output. The speaker is housed in its own sturdy back box for rock-solid stability and minimum sound bleed, and is powered by the SA250, a separate audiophile-standard 250W Class D amplifier.

Specifications

SA250 Mk2

The SA250 Mk2 subwoofer amplifier is specifically designed for use with the Custom Installation Series In-wall subwoofers, the ISW-3 and ISW-4. Deceptively slim at 3.5inches, and weighing 11.9lb, it provides 250 Watts of power.

The SA250 Mk2's equalisation is custom tailored to the In-wall subwoofers, with a two position EQ switch to select between the ISW-3 and ISW-4.

Specifications

CCM 818

An unobtrusive, flush-mounted version of the CCM817, the CCM818 is as powerful as it is discreet. The speaker's 200mm (8in) woven Kevlar cone drive unit is fitted at a 12-degree angle, thereby retaining some of its cousin's sound directionality.

Specifications

CCM 816

Featuring a Kevlar bass/midrange drive unit, the CCM816 in-ceiling speaker is a smaller version of the CCM818, designed for home theatre or 2-channel applications. Fitted at a 28-degree angle, the 165mm (6.5in) woven Kevlar cone drive unit enables the optimum listening axis to be directed more towards the listening area.

Specifications

CWM LCR7

The CWMLCR7 features twin 100mm (4in) mica cone bass drivers, a 100mm (4in) woven Kevlar cone midrange driver and a Nautilus tube-loaded 25mm (1in) aluminium dome tweeter. The mica bass drivers provide the low frequency snap characteristic of any really good loudspeaker.

Specifications